A Subaru Forester recently rolled into the Romano’s Automotive workshop for a full clutch replacement, and it gave us the perfect opportunity to talk about one of the most overlooked steps in a quality clutch job: machining the flywheel. 🔧 Skip this step, and even a brand-new clutch kit can fail early, vibrate, or never quite feel right. Do it properly, and you’ve got a driveline that’ll serve you faithfully for years. ✨
The Job: Clutch Out, Flywheel Off, Back to New
The process starts with dropping the gearbox and removing the old clutch assembly. On this Forester, the pressure plate and friction disc were showing classic signs of wear – heat discolouration, uneven contact patches and the early signs of glazing. Once the clutch was out, the flywheel came off and headed straight to the machine shop for resurfacing.
Machining removes a thin layer from the friction face to restore a perfectly flat, clean mating surface. When it came back, it looked factory-fresh and was ready to pair with the new clutch kit, pilot bearing and release components.
Why Flywheel Machining Is Non-Negotiable
Fitting a new clutch to a worn or heat-damaged flywheel is one of the fastest ways to cause a comeback. Here’s what resurfacing prevents:
- Hot spots: Hardened areas on the flywheel face that cause chatter, judder and uneven wear on the new friction disc.
- Glazing: A polished, slippery surface that reduces the clutch’s ability to bite properly, leading to slipping under load.
- Vibration and noise: An out-of-true flywheel can transmit unpleasant vibrations through the pedal and driveline.
- Shortened clutch life: A new clutch bedding into an uneven surface will wear out far sooner than it should.
Signs Your Subaru’s Clutch Needs Attention
Not sure if your Forester, Outback or Impreza is due for a clutch job? Keep an ear and foot out for slipping during acceleration, a high or spongy pedal, grabbing or shuddering as you release, grinding on shifts, or a burning smell after hill starts. Catching it early often means a straightforward clutch and flywheel refresh rather than more extensive gearbox or dual-mass flywheel damage down the track.
Book Your Subaru In With Romano’s Automotive
At Romano’s Automotive in Perth, we treat every clutch job as a complete driveline refresh – including flywheel machining, fresh seals where needed, and quality OEM-spec parts. If your Subaru is slipping, grabbing or feeling off, don’t wait for it to leave you stranded. Book online at https://shopcommand.com.au/book/romanos-automotive or give us a call on 0401 747 320 or 0482 074 129 and we’ll get your Forester shifting sweetly again.
Request a Quote
Fill in the details below and we will be in touch with you.