A Subaru Forester rolled into the Romano’s Automotive workshop recently with a familiar story 👑 — clunky takeoffs, a slightly vague rear end, and that tired feeling you only notice when it’s been creeping up for years. The culprit? Worn-out factory rear differential mount bushes. A small component, but one that has a surprisingly big say in how your Subaru drives 💜.
What the Rear Diff Mount Bushes Actually Do
The rear differential on a Subaru Forester is isolated from the chassis by rubber bushes designed to absorb vibration and allow a controlled amount of movement. Over time, heat cycling, oil contamination, and constant load fatigue the rubber. Once those bushes start to collapse or crack, the diff is free to shift under acceleration and deceleration — which is exactly where that classic clunk on takeoff comes from.
Common symptoms of tired diff mount bushes include:
- A hard clunk when shifting between drive and reverse
- Driveline shunt under acceleration or when lifting off the throttle
- Vibration through the floor at highway speeds
- A vague, disconnected feel from the rear of the car
Why We Fitted Polyurethane Replacements
For this Forester, we pressed out the sagging factory rubber bushes and installed a fresh set of polyurethane replacements. Polyurethane is denser and far more resistant to oil, heat, and deformation than OEM rubber, which means the diff stays locked in its intended position under load.
The Benefits in Practice
- Sharper driveline response — power transfers to the wheels without the slop
- No more clunking on takeoff or gear changes
- Improved rear-end feel, particularly through corners and over bumps
- Longer service life compared to replacement rubber bushes
There is a small trade-off — poly bushes can transmit a touch more vibration than rubber — but on a Forester being used as a daily driver or weekend tourer, the sharper feel and durability are well worth it. It’s a cost-effective upgrade that genuinely transforms how the car drives.
Book Your Subaru In With Romano’s Automotive
If your Subaru Forester, Outback, or WRX is clunking, vibrating, or just not feeling as tight as it used to, don’t put it off — worn diff mount bushes can accelerate wear on surrounding driveline components. The team at Romano’s Automotive in Perth specialises in Subaru diagnostics and driveline repairs, and we’ll have your car feeling sharp again. Book online at shopcommand.com.au/book/romanos-automotive or give us a call on 0401 747 320.
Request a Quote
Fill in the details below and we will be in touch with you.