🚨 One brake pad worn to the backing plate, the other barely touched — a Ford Escape rolled into the workshop recently showing a textbook case of uneven brake pad wear. It’s one of those faults that looks minor on the surface but tells a much bigger story about what’s happening inside the caliper. Left unchecked, it can turn a routine pad replacement into rotors, hardware, and a serious bill. 🔧
Why Uneven Brake Pad Wear Happens
When one pad wears significantly faster than its partner on the same caliper, the culprit is almost always a sticky or seized caliper slide pin. Modern floating calipers rely on two guide pins that allow the caliper body to slide freely as the piston pushes the inner pad against the rotor. That sliding action is what pulls the outer pad into contact at the same time, applying even clamping force across both friction surfaces.
When a slide pin corrodes, loses its lubricant, or has a torn boot letting moisture in, the caliper can no longer float properly. The result is one pad doing all the work while the other coasts along for the ride — exactly what we found on this Ford Escape.
The Hidden Damage of Ignoring It
Uneven pad wear isn’t just a pad problem. The flow-on effects add up quickly:
- Warped or scored rotors from uneven heat and clamping pressure
- Reduced braking performance, longer stopping distances and pulling under brakes
- Premature hardware failure as abutment clips and anti-rattle shims wear out of shape
- Caliper piston damage if the pad wears down to the backing plate
A job that should be a straightforward pad swap can quickly escalate into rotors, calipers and hardware — the classic wallet workout.
How We Fixed It
On this Escape, we stripped the caliper down, cleaned and inspected the slide pins, replaced the damaged boots, and re-greased everything with high-temperature caliper lubricant. A fresh set of quality black pads went in with brand-new hardware to ensure proper pad movement and even wear going forward. A quick road test confirmed smooth, even stops with no pulling or noise.
Book Your Brake Inspection in Perth
If your car is pulling under brakes, squealing, or you’ve noticed uneven pad wear at your last service, don’t put it off. The team at Romano’s Automotive in Perth specialises in diagnosing brake faults properly the first time — no guesswork, no shortcuts. Book online at shopcommand.com.au/book/romanos-automotive or call us on 0401 747 320 to get your brakes back to their best.
Request a Quote
Fill in the details below and we will be in touch with you.