Coolant is one of those unsung heroes under your bonnet 🔧 — quietly doing its job until, one day, it isn’t. And when a cooling system fails, it rarely gives you a polite warning. It’s usually steam rolling out on the Kwinana Freeway on the hottest day of the year 😅. That’s why at Romano’s Automotive, we take coolant servicing seriously, using a sealed filler system to bleed the cooling system properly and eliminate the air pockets that cause bigger problems down the road.
Why Coolant Health Is Critical
Modern engines run hotter, tighter, and more efficiently than ever. That means the coolant inside them is working harder to manage combustion temperatures, protect alloy components from corrosion, and keep cabin heating and cooling systems functioning correctly. Over time, coolant breaks down chemically, losing its corrosion inhibitors and its ability to transfer heat effectively.
When that happens, you can end up with:
- Overheating caused by degraded fluid or trapped air
- Water pump and radiator corrosion from acidic, contaminated coolant
- Heater core blockages that leave you with no cabin heat in winter
- Head gasket damage from repeated thermal stress
The Right Way to Bleed a Cooling System
Here’s where a lot of DIY jobs (and rushed workshop jobs) go wrong. Simply topping up the reservoir doesn’t cut it. Modern European and Asian vehicles have complex cooling circuits with high points that trap air, and if those air pockets aren’t purged, they’ll create hot spots, cause erratic temperature readings, and eventually damage the engine.
Our Sealed Filler Process
We use a sealed vacuum filler that pulls all the air out of the system before drawing fresh coolant in under vacuum. This ensures the system is filled completely on the first attempt — no burping, no guesswork, no repeat visits. It also protects sensitive components like electric water pumps and thermostats that can be damaged by dry running or cavitation.
Every coolant service also includes an inspection of hoses, clamps, the radiator cap, and the water pump for early signs of wear. Catching a weeping hose now is a lot cheaper than replacing a warped cylinder head later.
Book Your Coolant Service in Perth
If it’s been more than a couple of years since your last coolant change — or you can’t remember when it was done at all — now’s the time to tick it off. The team at Romano’s Automotive in Perth will inspect, flush, and refill your cooling system the right way, so you’re not left stranded on the freeway. Book online at https://shopcommand.com.au/book/romanos-automotive or give us a call on 0401 747 320 or 0482 074 129.
Request a Quote
Fill in the details below and we will be in touch with you.